IF YOU HAVE JUST ONE METER, MAKE THIS THE ONE!

The Tri-Metric 2030-RV keeps a running total of power into or out of your battery bank and displays the present level of charge. Referred to as a “net meter”, the Tri-Metric is one of the most comprehensive displays a battery management system can utilize.

The Meter head mounts anywhere in the vehicle or trailer for easy checking. Small wires run from the meter to a shunt near the battery. Note: these small wire should not run parallel to any AC wiring.

If installing where there is no “power panel” consider the Trimetric Wiring Kit that includes 500A shunt, 2/0 lug w/wrench, shunt cable and 25′ 4 conductor tri-wire (sold separately).

This -RV version of the Trimetric has all the same functionality as the A version, in a smaller package with its own mounting enclosure included.

The Tri-Metric meter reads:

VOLTS: The Tri-Metric can monitor 2 battery banks, with voltage being the only parameter read on the second bank. Accurate to 1/10 volt. For 12, 24, or 48 volts.
AMPS or WATTS: Displays the rate of energy going in or out of your batteries so you can monitor charging system and energy consumption.
AMP-HOURS: Your battery state of charge in amp-hours.
% Full: display will give you a quick indication of battery state-of-charge.
Also shows advanced functions: Flashing alarm reminds that battery needs charging or needs equalizing. Displays days elapsed since last full charge; amp hours cycled since last full charge; total amp hours cycled since battery was new; lowest and highest voltage since reset. Visit www.bogartengineering.com for more details.

New Data logging feature records daily maximum battery voltage level, and minimum charging amps to check for proper charging levels for the last 5 days.

Dimensions: 5 1/4″ x 3 1/8″ x 1 3/8″
Shipping weight: .6 lb

This is similar to the meter that we use to keep track of our batteries at our homes and in the Backwoods HQ.